Cleaning And Maintenance; Trouble Shooting - Unold 58275 Notice D'utilisation

CLEANINg AND mAINTENANCE

1. Unplug the appliance and let it cool down
before cleaning it.
2. Do not immerse the appliance into water or
any other liquid for cleaning.
3. Wipe the surface and the housing with a
damp cloth.
4. Do not use any strong or abrasive cleansers
or spoges.

TrOUBLE SHOOTINg

Fault Reason
E0 No cookware on the plate,
cookware not fitted for
induction, cookware not placed
correctly in the middle
E1 Power circuit fault
E2 Temperature control fault
E3 Variations of voltage
E4
E5 Too high surface temperature
E6 Overheating due to fan fault
E7 Overheating due to fault of the
temperature sensor
18
5. Do not pour water or any other liquid on the
hotplate.
6. If necessary you can use a cleanser or
scraper for ceran glass cookers.
7. Please clean the ventilation slots regularly
with a soft brush to prevent dust deposits.
Reaction
Only use cookware approved for induction
cooking with a diameter of at least 12 cm
and max. 26 cm,
Place the cookware in the midldle of the
respective cooking plate.
Send the appliance to our technical
service for repair.
Send the appliance to our technical
service for repair.
In case of sudden fluctuations of
the voltage cooking is automatically
interrupted. After approx. 1 minute
cooking is contiuned.
If the surface temperature is too high, an
acoustic signal is given and the appliance
is shout off automatically. As soon as
the temperature has fallen to the normal
temperautre range, cooking can be
restarted.
In order to avoid overheating, we
recommed to use low power or
temperature settings for small saucepans
and medium to hiogh settings for large
saucepans .
As soon as the temperature has fallen to
the normal temperautre range, cooking
can be restarted.
Send the appliance to our technical
service for repair.