Cleaning And Maintenance; Trouble Shooting - Unold 58215 Notice D'utilisation

you until the temperature returns to normal
(fault E 5).
3. high voltage pulse protection
During operation, when power supply receives
a transient high voltage pulse (e.g. lightning
strike), the induction
automatically and in one minute will resume
automatically.
4. small metal part protection
If small iron metal parts with a diameter of less
than 80 mm are detected on the hotplate, the
appliance cannot be switched on.

cleanIng and maIntenance

1. Unplug the appliance and let it cool down
before cleaning it.
2. Do not immerse the appliance into water or
any other liquid for cleaning.
3. Wipe the surface and the housing with a
damp cloth.
4. Do not use any strong or abrasive cleansers
or spoges.
5. Do not pour water or any other liquid on the
hotplate.

trouBle shootIng

Fault Reason
E0 No cookware on the plate,
cookware not fitted for
induction, cookware not placed
correctly in the middle
E1 Power circuit fault
E2 Temperature control fault
E3 Variations of voltage
E4
18
cooker will stop
5. suitable pans
The appliance detects automatically if the used
saucepan is suitable for induction cooking or not.
If the saucepan is not suitable, a buzzer sound
will be heard to alert you until an appropriate
saucepan is put on the hotplate (fault E 0).
6. If necessary you can use a cleanser or
scraper for ceran glass cookers.
7. Please clean the ventilation slots regularly
with a soft brush to prevent dust deposits.
8. The cooking plate must be completely dry
before using it again.
Reaction
Only use cookware approved for induction
cooking with a diameter of at least 12 cm
and max. 26 cm,
Place the cookware in the midldle of the
respective cooking plate.
Send the appliance to our technical
service for repair.
Send the appliance to our technical
service for repair.
In case of sudden fluctuations of
the voltage cooking is automatically
interrupted. After approx. 1 minute
cooking is contiuned.