Cleaning And Care; Trouble Shooting - Unold 58235 Notice D'utilisation

CLEANING AND CARE

1. Do not immerse the appliance
into water or any other liquid for
cleaning.
2. Wipe the surface and the housing
with a damp cloth.
3. Do not use any strong or abrasive
cleansers or spoges.

TROUBLE SHOOTING

Fault Reason
E0 No cookware on the pla-
te, cookware not fitted for
induction, cookware not
placed correctly in the
middle
E1 Power circuit fault
E2 Temperature control fault
E3 Variations of voltage
E4
E5 Too high surface tempe-
rature
E6 Overheating due to fan
fault
E7/E8 Overheating due to fault
of the temperature sensor
24
Unplug the appliance
and let it cool down
before cleaning it.
4. Do not pour water or any other
liquid on the hotplate.
5. If necessary you can use a clean-
ser or scraper for ceran glass coo-
kers.
6. Please clean the ventilation slots
regularly with a soft brush to pre-
vent dust deposits.
Reaction
Only use cookware approved for
induction cooking with a diame-
ter of at least 12 cm and max.
26 cm,
Place the cookware in the midldle
of the respective cooking plate.
Send the appliance to our techni-
cal service for repair.
Send the appliance to our techni-
cal service for repair.
In case of sudden fluctuations of
the voltage cooking is automati-
cally interrupted. After approx. 1
minute cooking is contiuned.
If the surface temperature is too
high, an acoustic signal is given
and the appliance is shout off au-
tomatically. As soon as the tem-
perature has fallen to the normal
temperautre range, cooking can
be restarted.
In order to avoid overheating, we
recommed to use low power or
temperature settings for small
saucepans and medium to hiogh
settings for large saucepans .
As soon as the temperature has
fallen to the normal temperautre
range, cooking can be restarted.
Send the appliance to our techni-
cal service for repair.