Operation Of The Induction Cooker - Unold 58275 Notice D'utilisation

temperature
Press the FUNKTION/FUNCTION button twice.
The display shows WARM .
Select the required temperature by touching the
plus resp. minus button. The following temp-
eratures can be selected:
Level 1 60 °C
Level 2 100 °C
Level 3 140 °C
Level 4 180 °C
Level 5 220 °C
Level 6 240 °C

OPErATION OF THE INDUCTION COOKEr

1. Insert the power cord into a power outlet
as per rating label. A buzzer sound will be
heard and the display is lighted in blue.
All display options are shown for 1 second.
Then the display shows – – – –.
2. If no key is pressed within 10 seconds,
the blue lighting turns off (power save
function in standby mode). As soon as a
key is pressed to start cooking, the display
is lighted again and remains lighted in blue
during the cooking time.
3. Place an appropriate, filled saucepan in the
middle of the hotplate.
4. Press the staRt-stoPP button. The display
shows 00:00 .
5. Press the button FUNKtIoN/FUNctIoN and
set within the next 5 seconds the selected
power rating or temperature as described
above by using the plus and minus buttons.
You can operate the induction cooker
either by selecting a power rating level or a
temperature level. As soon as a selection is
made, the fan begins to operate.
6. If no saucepan is placed on the hot plate,
a buzzer alarm is heard in inter vals, the
display shows e 0 and the appliance is
switched off after 60 seconds.
7. The induction cooker can be set either in
the temperature range setting or in the
power setting.
8. If no power level is selected press the
FUNKtIoN/FUNctIoN button again and select
the temperature level up to max. 240 °C.
Whenever the appliance reaches the preset
maximum temperature, the heating is
interrupted automatically.
Keep warm
Cook gently
Roaste gently
Start to cook / roast
Grill
Grill
PlUs/MINUs buttons
The plus and minus buttons are used to preset
the cooking time, the power rating or the
temperature as described above.
start/stop button
Press START/STOPP
appliance.
The display shows – – – – to confirm that the
appliance is connected to the mains.
If no button is pressed the appliance will switch off
after two hours.
9. During cooking you can change the power
rating or temperature at any time.
10. If you want to preset the cooking time, press
the button zeIt/tIMe. Select the cooking
time as described above.
11. After some seconds the two fogures right
of the colon start to blink. Set the minute
value now.
12. Press the zeIt/tIMe button again to confirm
the preset cooking time. This will be
conformed by a short buzzer sound.
13. During cooking the remaining time will be
shown in the display alternating with the
selected power resp. temperature level.
14. After reaching the preset cooking time, the
appliance is switched off auto matically.
15. The display is lighted in red (residual heat
display).
16. During cooking the appliance can be
switched off at any time by pressing the
staRt-stoP button.
17. The preset cooking time will not be kept in
memory after the end of cooking.
18. The fan will run for about 30 seconds after
the end of the cooking time.
19. If no cooking time has been preselected, the
appliance will be switched off automatically
after 2 hours.
20. Disconnect after use the plug from the
outlet to save electricity.
to switch on the
17