Pausing Cd Playback; Entering Disc Titles - Pioneer DEH-P90HDD Mode D'emploi

P
ausing CD playback
Pause lets you temporarily stop playback of the
CD.
1. Press FUNC and then press PAUSE to
select the pause mode.
2. Press PAUSE to turn the pause on.
The light illuminates. Play of the current
track pauses.
• Press PAUSE again to turn the pause off.
• When the pause mode is exited while
pause is on, "PAUSE" is displayed in the
basic display.
Note:
• You can also turn pause on or off by pressing
PAUSE in the following display.
E
ntering disc titles
Disc title input lets you input up to 48 CD titles
up to 10 letters long into the built-in CD player.
If you input a CD title, the entered title is dis-
played.
For details of operation, refer to "Entering disc
titles" on page 46 under "Multi-CD Player".
Note:
• When playing a CD TEXT disc, if you switch to this
mode, "No title input" is displayed and you cannot
input the title.
• After the titles for 48 discs have been entered, the
data for a new disc will overwrite the oldest one.
• If you connect a multi-CD player, you can input disc
titles for up to 100 discs.
• When a multi-CD player that does not support disc
title functions is connected, you cannot enter disc
titles in this product.
22