S
toring and recalling services
Storing services
1. Press NEXT to display "1" – "6".
Press NEXT until "1" – "6" appears.
2. When you find a service that you want to
store in memory, press and hold any of
the buttons 1 – 6 until the preset number
stops flashing.
The service is stored in memory under the
selected button.
Recalling services
1. Press NEXT to display "1" – "6".
Press NEXT until "1" – "6" appears.
2. Press any of the buttons 1 – 6 to recall
the service preset under that button.
Note:
• You can also use 5 or ∞ to recall services memo-
rized under the buttons 1 – 6.
C
hanging band
• Press BAND to select the desired band.
Press BAND repeatedly to switch between
the following bands:
DAB 1 = DAB 2 = DAB 3
S
witching the display
• Press DISP to select the desired display.
Press DISP repeatedly to switch between
the following displays:
FORM 1
SERVICE (service label) = COMPONENT
(service component label) = D.TEXT
(dynamic label segment head line) =
ENSEMBLE (ensemble label) = PTY (PTY
label)
FORM 2
SERVICE (service label) and COMPO-
NENT (service component label) =
D.TEXT (dynamic label segment head line)
= SERVICE (service label) and ENSEM-
BLE (ensemble label) = SERVICE (service
label) and PTY (PTY label)
Note:
• With a service component that has no service com-
ponent label or dynamic label, the display is blank
when you switch to service component label and
dynamic label.
S
witching the road traffic flash
and transport flash on or off
1. Press NEXT to display "TA".
Press NEXT until "TA" appears.
2. Press TA to turn the road traffic flash and
transport flash on.
The "3TRFC" or "T" indicator lights.
• Press TA again to turn the road traffic flash
and transport flash off.
Canceling road traffic flash and transport
flash interruptions part way through
1. Press NEXT to display "TA".
Press NEXT until "TA" appears.
2. To cancel a road traffic flash or transport
flash interruption and return to the origi-
nal source, press the TA during an
announcement interruption.
50