Scanning Tracks Of A Cd; Playing Tracks In A Random Order; Pausing Cd Playback - Pioneer SUPER TUNER III D FH-P5000MP Mode D'emploi

Built-in CD Player
1 Press FUNCTION to select RPT.
Press FUNCTION until RPT appears in the dis-
play.
2 Push Multi Control up to turn repeat
play on.
RPT :ON appears in the display. The track cur-
rently playing will play to the end and then re-
peat.
3 Push Multi Control down to turn repeat
play off.
RPT :OFF appears in the display. The track cur-
rently playing will continue to play and then
play the next track.
Note
If you perform track search or fast forward/re-
verse, repeat play is automatically cancelled.
Playing tracks in a random
order
Random play lets you play back tracks on the
CD in a random order.
1 Press FUNCTION to select RDM.
Press FUNCTION until RDM appears in the
display.
2 Push Multi Control up to turn random
play on.
RDM :ON appears in the display. Tracks will
play in a random order.
3 Push Multi Control down to turn ran-
dom play off.
RDM :OFF appears in the display. Tracks will
continue to play in order.

Scanning tracks of a CD

Scan play lets you hear the first 10 seconds of
each track on the CD.
1 Press FUNCTION to select Scan.
Press FUNCTION until Scan appears in the
display.
2 Push Multi Control up to turn scan play
on.
Scan :ON appears in the display. The first 10
seconds of each track is played.
3 When you find the desired track push
Multi Control down to turn scan play off.
Scan :OFF appears in the display. The track
will continue to play.
# If the display has automatically returned to
the playback display, select Scan again by press-
ing FUNCTION.
Note
After scanning of a CD is finished, normal play-
back of the tracks will begin again.

Pausing CD playback

Pause lets you temporarily stop playback of
the CD.
1 Press FUNCTION to select Pause.
Press FUNCTION until Pause appears in the
display.
2 Push Multi Control up to turn pause on.
Pause:ON appears in the display. Play of the
current track pauses.
Section
06
21
En