SEFRAM 7357 Manuel D'utilisation page 24

CAUTION
˙ Disconnect the test leads from the test points before chang-
ing the position of the function rotary switch.
˙ Never connect a source of voltage with the function rotary
switch in Ω, A, Loop-Power position.
˙ Do not expose Meter to extremes in temperature or high
humidity.
˙ Never set the meter in Ω, A, Loop-Power function to
measure the voltage of a power supply circuit in equipment
that could result in damage the meter and the equipment
under test.
Symbols as marked on the Meter and Instruction manual
Risk of electric shock
See instruction manual
AC measurement
DC measurement
Equipment protected by double or reinforced insulation
<
Battery
Fuse
Earth
Conforms to EU directives
Do not discard this product or throw away
Unsafe Voltage
To alert you to the presence of a potentially hazardous voltage,
when the Tester detects a voltage ≧30 V or a voltage
overload (OL) in V, mV . The " " symbol is displayed and High
voltage indicator is turned on.
Maintenance
Do not attempt to repair this Meter. It contains no user service-
able parts. Repair or servicing should only be performed by
qualified personnel.
Cleaning
Periodically wipe the case with a dry cloth and detergent.
Do not use abrasives or solvents.
2