When Alarm Sounds; Alarm Clock Activation In Standby Mode; Disabling Alarms; Snooze Timer - PERFECTPRO POWER-PLAYER Manuel De L'utilisateur

Rotate the Tuning / Select knob to choose the alarm minute. Press the knob to
6.
confirm the setting. The display will then return to the alarm setting menu. If the
sound system has been set to use a 12 hour clock format, there will also be an
option here for setting AM or PM for the alarm time.
7. Rotate the Tuning / Select knob to highlight 'Enable' and press the knob. The
display will show the Frequency options for the alarm. The alarm frequency options
are as follows: 'Off' - the alarm will be disabled 'Daily' - the alarm will sound
everyday 'Once' - the alarm will sound once 'Weekends' - the alarm will sound only
at weekends 'Weekdays' - the alarm will sound on weekdays only. Rotate the
Tuning / Select knob to choose the required alarm frequency option. Choosing Off
will disable the alarm. Press the knob to confirm the selection.
8. The alarm can be set to buzzer, DAB radio or FM radio. For whichever radio mode
is selected, the radio alarm may be set to any of the stations, which have been
stored as presets or to the station most recently listened to. Rotate the Tuning /
Select knob to highlight the current 'Mode' option for the alarm, then press the
knob if you wish to change it. Rotate the Tuning / Select knob to highlight either
'Buzzer' or the required radio mode. Press the knob to confirm the selection.
9. If setting the alarm to a radio option, rotate the Tuning / Select knob to highlight
the 'Preset' option then press the knob if you wish to change it. Choose from either
the radio station 'Last listened' to, or from the presets 1 - 10. Scroll to the chosen
option and press the knob to confirm the selection. Note that you can only set the
alarm to use a preset which has already been stored.
10. Rotate the Tuning / Select knob until the 'Volume' option is highlighted on the
display and press the knob if you wish to change it. The sound system uses the
saved volume setting for each alarm when it sounds. Rotate the knob to set the
required volume and then press the knob to confirm the setting.
11. In order to store the alarm settings rotate the Tuning / Select knob until 'Save' is
highlighted. Press the knob to store the alarm settings. Your radio will show 'Alarm
saved' and will then go back to the list of alarms with the new alarm setting shown
in the display. If you decide not to save the settings, press the Menu button. Active
alarms are shown using small alarm indicators at the top of the playing displays and
at the bottom on the clock display when in standby.
Note: If you make a mistake at any point while setting the alarms, use the Menu button
to go back to the previous screen.

WHEN ALARM SOUNDS

The buzzer or radio alarm will sound at the selected times for up to 60 minutes unless
cancelled. The volume used for the alarm will be as specified during the alarm setting
procedure. If the radio cannot connect to the specified radio station, the buzzer alarm
will be used instead.
To cancel an alarm, press the Power button to return to standby mode. The alarm icon
will flash at the top of the playing mode displays, and the radio will automatically switch
back to stand-by mode when the 60 minutes have elapsed.
Note: If the radio is switched on because of an alarm you can control basic functions
such as volume and selecting presets.
25

ALARM CLOCK ACTIVATION IN STANDBY MODE

When the radio is connected to mains and in standby mode, pressing repeatedly the
Source button can activate or deactivate the Alarm 1 and Alarm 2.

DISABLING ALARMS

1. To disable a single alarm enter the alarm setup menu and rotate the Tuning /
Select knob until the desired alarm is highlighted on the display. Press the Tuning /
Select knob.
2. Rotate the Tuning / Select knob until the 'Enable' option is highlighted on the
display. Press the knob.
Rotate the Tuning / Select knob to highlight 'Off' and press the knob.
3.
4. Rotate the Tuning / Select knob until the 'Save' option is highlighted on the display
then press the knob to save the new setting. The chosen alarm will now be disabled.

SNOOZE TIMER

1. The buzzer or radio alarm can be silenced for 5 minutes by pressing the Tuning
/ Select knob. Should you wish for a longer snooze duration this can be extended.
Pressing the knob again while the sound system is snoozed will set the available
snooze time to 5, 10, 15 or 30 minutes.
2. While the snooze timer is active the remaining snooze time is shown next to the
flashing alarm icon on the clock display.
3. In order to cancel the Snooze timer while the alarm is suspended, press the Power
button.

SLEEP TIMER

Your radio can be set to turn off after a preset time has elapsed. The sleep timer setting
can be adjusted between 5 and 120 minutes in 5-minute increments.
1. Press the Power button to switch on your radio.
2. Access the menu for the current mode by pressing the Menu button. Rotate the
Tuning / Select knob until 'Main menu' is highlighted on the display. Press the knob
to enter the 'Main menu'.
3. Rotate the Tuning / Select knob until 'Sleep' is highlighted on the display then
press the knob.
4. Rotate the Tuning / Select knob until the required sleep time setting is selected.
Press the knob to confirm the setting. The sleep timer can be set to between 5 and
120 minutes, or to Off.
GB
GB
26