Display Modes; Scan Sensitivity Setting; Preset Stations; Storing Preset Stations In Dab And Fm Modes - PERFECTPRO POWER-PLAYER Manuel De L'utilisateur

Display Modes

When you are listening to a FM station with RDS system, repeatedly press the Info
button to cycle through the information. This will only function if the reception level is
sufficient and clear.
a. Radio text Displays the message about the station being listened to as
ticker text.
b. Program type Displays the type of station being listened to, e.g. Pop, Classic,
News, etc.
c. Frequency Displays the frequency of the station being listened to.
d. Date Displays the date of today.

Scan sensitivity setting

The radio will normally scan all stations from FM broadcasts including the weaker
signals. However, you may wish the Auto-scan to find only those stations with strong
enough signals to give good reception.
1. Press the Power button to turn on the radio.
2. Select the FM band by pressing the Source button.
3. Press the Menu button, the display shows "Scan setting".
Press the Tuning / Select knob, display will show "Strong stations only?".
4.
5. Rotate the Tuning / Select knob to select between "Yes" or "No" (default is Yes).
The "Yes" option will allow the radio to find strong signals only when scanning.
6. Press the Tuning / Select knob to confirm your setting. The display will return to
normal radio display.

PRESET STATIONS

Storing preset stations in DAB and FM modes

There are 20 memory presets in the radio, 10 for DAB and 10 for FM. Presets are
remembered by the radio in the event of a power failure.
For preset 1-5:
1. Press the Power button to turn on the radio.
2. Press the Source button to select the desired waveband.
3. Tune to the required station.
4. Press and hold the required Preset button until the display shows for example
"Preset 01 Stored".
5. Repeat step 3 and 4 for the remaining presets.
For preset 6-10:
1. Press the Power button to turn on the radio.
2. Press the Source button to select the desired waveband.
3. Tune to the required station.
15
Press and hold the Preset button until the display shows the list of presets.
4.
5. Turn the Tuning / Select knob until you reached the required preset number (1-10).
6. Press the Tuning / Select knob to store the preset.
Stations stored in the preset memories can be over-written by following the above
procedure.

Recalling preset stations in DAB and FM modes

For preset 1-5:
1. Press the Power button to turn on the radio.
2. Press the Source button to select the desired waveband.
3. Briefly Press the required Preset button, the display will show, e.g. "P1", at the end
of first line.
For preset 6-10:
1. Press the Power button to turn on the radio.
2. Press the Source button to select the desired waveband.
3. Briefly Press the Preset button, the display will show the list of presets.
4. Turn the Tuning / Select knob until you reached the required preset number (1-10).
5. Press the Tuning / Select knob to select the preset. The display will return to
normal radio display.

BLUETOOTH

The Bluetooth mode on your Powerplayer allows you to play audio, play sound from
video files and stream music from Bluetooth capable devices such as your mobile
phone, computer, tablet etc. through your Powerplayer loudspeaker.
• When a Bluetooth enabled device such as your Powerplayer is in a
'discoverable' state other Bluetooth devices can detect, pair with or connect to it.
• 'Bluetooth pairing' occurs when two Bluetooth enabled devices agree to establish
a connection and communicate with each other.
• The Bluetooth connected LED on the panel will blink fast with short intervals
when it is discoverable or when it is trying to connect to a previously paired
Bluetooth device. When a device is paired with and connects to the radio, the
blue Bluetooth connected LED will blink slow with long intervals.
Bluetooth connectivity performance may vary depending on the connected Bluetooth
devices. Please refer to the Bluetooth capabilities of your device before connecting
to your Powerplayer. All features may not be supported on some paired Bluetooth
devices.
A Bluetooth connection can provide a link for audio up to a distance of approximately ten
metres. When pairing two Bluetooth enabled devices, for convenience, we recommend
they should be no more than 2 to 3 metres apart. The presence of other functioning
Bluetooth devices during connection may lead to operational difficulties.
GB
GB
16