Usb Mode; Insert And Remove A Usb Memory Device; Playing Music Files; File Searching - PERFECTPRO POWER-PLAYER Manuel De L'utilisateur

3. The LCD display will show "Pairing" and the radio's Bluetooth is free for any mobile
phone connection as it is in discoverable mode now.
Note: "Discoverable" is the option that force the Bluetooth of this Powerplayer to
disconnect from your mobile phone and enter the "discoverable mode". This is the way
to allow the Bluetooth pairing to another device. If no new device is paired, the Bluetooth
will automatically try to connect to the last device when it is switched off and on again.
The Auto-Power management function will be activated in Bluetooth mode. If there is no
signal from Bluetooth for a period of over 15 minutes, the radio will automatically switch
to standby mode. Pressing the Power button will wake up the unit.

USB MODE

CONDITIONS TO PREVENT MOIST FROM ENTERING THE RADIO!! KEEP THE
RUBBER COVER CLOSED UNDER THESE CONDITIONS.
USB memory devices can be used with the radio for playback of MP3, AAC, FLAC and
WAV files.
The radio has been tested with a range of USB memory devices up to 32GB. However,
there are many different USB memory device variants available and not all of them can
be guaranteed to work in this radio. Memory must use the FAT or FAT32 filing system in
order to operate in this radio.
Audio formats supported for playback are MP3, AAC, FLAC and WAV. Playback does
not support files encoded using WMA lossless, WMA voice, WMA 10 professional, or
files of any format that have DRM protection.
The USB socket are located on the side behind the rubber cover. Make sure the rubber
cover is closed well after use to prevent moist and dirt from entering the radio.
The USB memory device should not be removed during playback as damage or
corruption of files may occur.
USB memory devices are not included with this radio.
Note: When the radio is playing a USB stick, the batteries will be charged in low current
mode. Once the USB stick is removed normal charging will continue.

Insert and remove a USB memory device

Carefully insert a USB memory device into the USB socket. To remove the USB memory
device, simply pull the device out.
19

Playing music files

1. Press the Power button to turn on the radio.
2. Press the Source button to select the USB. The display shows "Loading...Please
wait". It may take some time before the radio has read in the folders and files data
on the memory device.
3. After reading the USB memory device, the radio will start to play the first file (song)
in the first folder. If no USB memory device is inserted, the display will show "NO
DEVICE MOUNTED!" respectively.
4. To pause the playback, press the
button again to resume the playback from pause position.
5. To skip to the next file, press the
6. To skip to the previous file, press the
7. While the file is playing, press and hold down either the
8. or (Preset 3) button. Release the button when the desired part of the file is
reached.
9. To skip to the next folder, presses the Folder + (Preset 2) button.
10. To skip to the previous folder, presses the Folder – (Preset 1) button.

File searching

1. Press the Menu button to enter USB playback screen.
Rotate the Tuning / Select knob to search the desired folder. Press the Tuning /
2.
Select knob to select the folder.
The display will show the first file of the selected folder.
3. Rotate the Tuning / Select knob to search the desired file. Press the Tuning /
Select knob to select the file. The radio will start to play the selected file.
The radio supports a limited number of folders and files in the searching:
Mode Max. no. of folders supported
Stop 999 (with folder name)
Play 999
(1-99 with folder name)
(100-999 without folder name)

Play mode

During USB memory device is playing,
1. Press the Menu button,
Rotate the Tuning / Select knob until the display shows "Music setting". Press the
2.
Tuning / Select knob.
3. Rotate the Tuning / Select knob to the desire play mode and press the Tuning /
Select knob to confirm.
(Preset 5) button. Press the (Preset 5)
(Preset 4) button.
(Preset 3) button.
(Preset 4) button
Max. no. of files supported
9999 (with file name)
9999
(1-999 with file name)
(1000-9999 without file name)
GB
GB
20