Setting The Alarm; Setting The Alarm Clock; Switching On/ Off The Alarm; Loudness - PERFECTPRO SLIM-3 Manuel De L'utilisateur

SETTING THE ALARM

The alarm can only be set when the radio is in standby mode. If no buttons are
pressed for 10 seconds, the radio will exit the alarm setup and the setting is cancelled.
Or press the MENU button during alarm setup, the radio will also return to standby mode
without saving the adjusted alarm settings.

Setting the alarm clock

1. Press the MENU button for about 3 seconds, the display shows "ALARM SET" and
the hour digits flash on the display.
2. Rotate the TUNING/SEEK knob to set the hour.
3. Press the TUNING/SEEK knob to confirm. The minute digits flash.
4. Rotate the TUNING/SEEK knob to set the minute.
5. Press the TUNING/SEEK knob to confirm.
6. The display will then show "ALARM SOURCE". You may choose "BUZZER", "DAB",
"FM RADIO", "USB" or "SD". Rotate the TUNING/SEEK knob to select. If "DAB" is
selected, the last listened station will be played when the alarm fires.
Press the TUNING/SEEK knob to confirm.
7.
8. The display will then show "VOL XX". Rotate the TUNING/SEEK knob to change
the alarm volume.
9. Press the TUNING/SEEK knob button to confirm.
Note: When USB or SD has been set as alarm source, the radio will automatically start
repeat all play back during alarm period.
Note: If USB or SD has been set as alarm source and the related mass storage device
is not correctly inserted into the USB or SD socket, system will fire buzzer alarm when
the alarm is activated.

Switching on/ off the alarm

To switch the alarm on, press the MENU button briefly. The alarm icon will be shown
at the top left corner. To switch the alarm off, press the MENU button briefly again. The
alarm icon will be disappeared.
Press the ON/OFF button to turn off the alarm when it is firing.
21

LOUDNESS

The Loudness function enables to get compensation on lower and higher frequency.
The effect will be more audible when the radio is in a lower volume level (Dynamic
Loudness).
1. Press the LOUDNESS button to enable the loudness, the display shows
"Loudness On".
2. Press the LOUDNESS button again to disable the loudness, the display shows
"Loudness Off".

TONE

The Tone function enables the user to adjust the lower and higher sound frequencies.
1. Press the ON / OFF button to turn on the radio.
2. Press and hold the VOLUME/TONE knob for about 3 seconds, the display shows
"BASS 0".
3. Rotate the VOLUME/TONE knob to set the desired Bass level.
4. Press the VOLUME/TONE knob to confirm, the display shows "TREBLE 0".
5. Rotate the VOLUME/TONE knob to set the desired Treble level.
6. Press the VOLUME/TONE knob to confirm and return to normal display.

LANGUAGE SETTING

The radio can be configured to a different language.
1. Press the ON/OFF button to turn on the radio.
2. Press the MENU button, and then rotate the TUNING/SEEK knob until the display
shows "System".
3. Press the TUNING/SEEK knob; rotate the TUNING/SEEK knob until the display
shows "Language".
4. Press the TUNING/SEEK knob to enter the language adjustment menu.
Rotate the TUNING/SEEK knob until the desired language appears on the display
5.
(default is English).
6. Press the TUNING/SEEK knob to confirm your choice. The display will change to
the chosen language.
GB
22