Philips MC145 Mode D'emploi page 9

STA ND BY•
ON
VOL UME
SEL EC T
SO UR CE
SHU FFLE
SIDE A/B
PR OG RA
M RDS /NEW S
TAP E COU
DS C NTE R
INCR EDIB LE
SUR ROU ND
DB B
BAN D
TIME R ON/O
FF
TU NIN G
CLO CK/T IME
Playing a CD
1 Press SELECT SOURCE repeatedly to display CD.
2 Press OPEN·CLOSE to open the CD lid.
OPEN is displayed.
3 Insert an audio CD (printed side up) and close the lid.
READ is displayed and the CD player stops. The total
number of tracks and the total playing time of the CD
are displayed.
4 Press 2; (PLAY 2 on the remote control) to start
playback.
The current track number and the elapsed playing
time are displayed.
5 Press 9 (STOP 9 on the remote control) to stop
playback.
The total number of tracks and the total playing time
of the CD are displayed.
• You can pause playback by pressing 2; (; on the
remote control).
The time at which playback was interrupted flashes.
• Continue playback by pressing 2; (PLAY 2 on the
remote control).
Note: Playback will also stop if:
– you open the CD lid,
– the end of the CD is reached, or
– you select the tuner, tape or AUX.
R
REPEAT and SHUFFLE
Repeating the CD or the program
1 During playback press REPEAT to start repeated
playback.
is shown. The entire CD (or program if
REPEAT
available) is played repeatedly.
2 Press REPEAT again to return to normal playback.
disappears.
REPEAT
Playing tracks in random order
1 Press SHUFFLE to start shuffle play.
is shown and SHUFFLE flashes twice. The
SHUFFLE
tracks of the entire CD (or program if available) are
played in random order.
2 Press SHUFFLE again to return to normal playback.
disappears.
SHUFFLE
Note: Repeat and shuffle can be combined.
Selecting a track and searching
Selecting a track during playback
• Briefly press ∞ or § (PREV. ¡ or NEXT ™ on the
remote control) once or several times to skip to the
beginning of the current, previous or next track(s).
Playback continues with the selected track.
Selecting a track while playback is stopped
1 Briefly press ∞ or § (PREV. ¡ or NEXT ™ on the
remote control) once or several times to skip to the
previous or next track(s).
2 Press 2; (PLAY 2 on the remote control) to start
CD play.
Playback starts with the selected track.
Searching for a passage during CD play
1 Keep ∞ or § pressed (5 or 6 on the remote control)
to find a particular passage in a backward or forward
direction.
Fast playback starts at a low volume.
2 Release the button when you reach the desired passage.
Normal playback continues.
Note: During shuffle play and while playing a program,
searching is only possible within the particular track.
CD PLAYER
9