Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
How to remove the display from the installation mount
① Push the lock lever to unlock. Then pull out the unit mount plate.
② Insert the hexagonal wrench Ⓔ and lock the unit mount plate so that it does not
move.
③ Remove the main unit fixing screws Ⓓ fastening the main unit and installation mount (one
screw on each side).
④ Holding the bottom of the main unit, lift it up and towards you to release the hooks of the
upper and lower mount brackets Ⓕ . Then lift up and off.
38
③Ⓓ Main unit fixing screws
④
Mount surface
Publicité
Chapitres
Table des Matières
