Technical Data - Bosch GTL 3 Professional Mode D'emploi

OBJ_BUCH-828-001.book Page 20 Wednesday, October 15, 2008 3:12 PM
20 | English

Technical Data

Tile laser
Article number
Working range (with laser target plate or with ceiling plate)
Angular accuracy
Operating temperature
Storage temperature
Relative air humidity, max.
Laser class
Laser type
C
6
Batteries
Operating life time
– with 2 laser lines
– with 3 laser lines
Automatic switch-off after approx.
Weight according to EPTA-Procedure 01/2003
Dimensions
Degree of protection
1) The working range can be decreased by unfavourable environmental conditions (e.g. direct sun irradiation).
2) The angular accuracy between the 45° laser line and the 90° laser line is max.
Please observe the article number on the type plate of your measuring tool. The trade names of the individual
measuring tools may vary.
The measuring tool can be clearly identified with the serial number 5 on the type plate.
1 609 929 S09 | (15.10.08)
GTL 3
Professional
3 601 K15 200
1)
20 m
2)
± 0.2 mm/m
– 10 °C ... +50 °C
– 20 °C ... +70 °C
90 %
2
635 nm, <1 mW
1
4 x 1.5 V LR6 (AA)
18 h
12 h
30 min
0.5 kg
156 x 102 x 98 mm
IP 54 (dust and
splash water protected)
±
0.4 mm/m.
Bosch Power Tools