Dustcontrol DC AirCube Notice Originale page 17

Service DC AirCube 1200, 2000
While performing cleaning or maintenance on the
machine, the unit should be off and disconnected from
the power supply.
When the suction is reduced, due to the fi lters becoming
clogged, the red light will come on. (Note: Th is feature is
only at max speed.) only at max speed.)
Th e pre-fi lter should be changed. If the light is still on the
the HEPA fi lter should be changed too.
With heavy dust loads the life of the fi lters are shorter.
Use only original spare part fi lter. Use suitable breathing
protection and do the operation in a closed room. Th e
used fi lter should be sealed in a plastic bag and disposed
of according to approved methods.
Check regularly that the electrical cable is not damaged
in any way. With replacement of the cable and contact,
use only water proof replacements.
Change the fi lter:
DC AirCube 1200
Th e DC AirCube 1200, 2000 should be performance
tested and checked at least once per year or more fre-
quently if subject to intensive use.
Because this machine is used with dangerous sub-stances
(Note: Th is feature is maintenance is vital, worn parts should be replaced.
Never compromise the function of the DC AirCube
1200, use only original spare parts.
Th e fan is maintenance free.
DC AirCube 2000
DC AirCube - 17 Part No 94178