Star SP317 Guide D'installation page 30

DIP Switch Setting (Parallel Interface)
Each of the switches in the DIP switch array is factory preset to the "ON" position.
Be sure to turn the power for both the printer and host computer off before
changing the setting of the DIP switches.
Power off
I DIP-SW 1
Switch
1-1
(Not used)
1-2
1-3 Control code CR
1-4 Auto cutter (only SP347)
1-5 Setting the paper feed length
1-6 Setting the buffer size
1-7 (Not used)
1-8 Paper out detection function
DIP switch 2
DIP switch array
Function
– 28 –
ON OFF ON OFF
8 8
1 1
ON
Invalid
Valid
1/6-inch
1 K-bytes
Valid
DIP switch 1
OFF
Valid
Invalid
1/8-inch
2-lines
Invalid