Signature SMO 250IX/2 Instructions D'utilisation page 44

7.Operation Instructions
1. Clock Setting
W h en the microwave oven is electrified, the LED will display " 0 :00 " , buzzer will
ring once. 1) Press C " lock/ ki K tchen Time
hour figures will flash.
2) Turn " " to adjust the hour figures, the in
3) Press " Clock/ ki K tchen Timer , " the minute figures will flash.
4) Turn " " to adjust the minute figures, the input time should be within
0--59.
5) Press " Clock/ ki K tchen Timer " to finish clock setting. : " " will flash, and the time
will light.
Note: 1) If the clock is not set, it would not function when powered. 2) During
the process of clock setting, if you press "
the previous status automatically.
2. Microwave Cooking
Press " MicroW w ave " the LED will display P " 100. " Press "
" t o choose the power you want, and " P 100" , " P 80" " P 50" , P " 30 " or P10 " will displa y
for each added press.
Start/ + 3 0 s /Confirm
Then press "
time from 0:05 to 95:00.
Press "
Start/ + 3 0 s /Confirm
+
Example: If you want to use 80% microwave power to cook for 20 minutes, you
can operate the oven as the following steps.
" MicroW w ave
1) Press "
" Micro W w ave
2) Press "
microwave power.
Start/ + 3 0 s /Confirm
3) Press "
+
4) Turn " " to adjust the cooking time until the oven displays " 2 0:00" .
Start/ + 3 0 s /Confirm
5) Press
+
the adjustment time of the coding switch are as follow:
0---1 min : 5 seconds
1---5 min : 10 seconds
5---10 min : 30 seconds
10---30 min : 1 minute
30---95 min : 5 minutes
"
+
" again to start cooking.
once, the screen display " P 100 " .
once again or turn "
" to conf irm, and the screen displays " P 80" .
" to start cooking . Note: the step quantities for
r " once to select clock function, the
put time should be within 0--23.
Stop/Clear
" to confirm, and turn "
" to choose 80%
-44-
" , the oven will go back to
" MicroW w ave
for times or turn "
" to set cooking