Signature SMO 250IX/2 Instructions D'utilisation page 41

6.
INSTALLATION INSTRUCTIONS
Please Read the Manual Carefully Before Installation
Please note
Electrial connection
The oven is fitted with a plug and must only be
connected to a properly installed earthed socket. The
socket must onlybe installed and connecting cable
must only be replaced by a qualified electrician, and
in accordance with the appropiate regulations.
If the plug is no longer accessible following installation,
an all pole isolating switch must be present on the
installation side with a contact gap of at least 3 mm.
The fitted cabinet must not have a back wall behind
the appliance.
Minimum installation height: 85 cm.
Do not cover ventilation slots and suction holes.
Note:
Do not trap or bend the power cable.
A. Built-in furniture
380+2
-41-