Sony SNC-Z20N Manuel D'installation page 44

Lens
Zoom ratio ×18 (infinite)
Horizontal view angle
2.7° to 48°
Focal length f = 4.1 mm to 73.8 mm
F number F1.4 (Wide end), F3.0 (Tele end)
Minimum shooting distance
Tele end: 800 mm
Wide end: 10 mm*
* The wide end is preset at the factory to 29 mm.
For 10 mm setting, consult your authorized
Sony dealer or the store you purchased the
product.
Interface
Network port 10BASE-T/100BASE-TX
auto-negotiation (RJ-45)
I/O port Sensor input : make contact
Alarm output 1 and 2: 24 V AC/
DC or less, 1 A
(mechanical relay outputs
electrically isolated from the
camera)
Serial interface
Transparency type RS-232C
Video output VIDEO OUT: BNC, 1.0 Vp-p,
75 ohms, unbalanced, sync
negative
PC card slot PCMCIA Type II (1)
Others
Power supply 24 V AC 50/60 Hz, 12 V DC, PoE
Power consumption
9 W max.
Operating temperature
0 °C to 40 °C (32 °F to 104 °F)
Storage temperature
–
20 °C to 60 °C (
Dimensions 80 × 77 × 177 mm (5
inches)
not including the projecting parts
and tripod adapter
Mass Approx. 800 g (2 lb 10 oz)
Supplied accessories
CD-ROM (setup program and
User's Guide) (1)
Wire rope (1)
Shoulder screw M4 (1)
Installation Manual (this
document) (1)
B&P Warranty Booklet (1) (SNC-
Z20N only)
18
GB
Specifications
Optional Accessories
"Memory Stick" MSA-128 A (128 MB)
"Memory Stick" PC card adaptor MSAC-PC3
Wide conversion lens VCL-0637H
Design and specifications are subject to
change without notice.
–
4 °F to 140 °F)
5
/ × 7 × 7
8
Regular parts replacement
Some of the parts that make up this product
(electrolytic condenser, for example) need
replacing regularly depending on their life
expectancies.
The lives of parts differ according to the
environment or condition in which this
product is used and the length of time it is
used, so we recommend regular checks.
Consult the dealer from whom you bought
it for details.