Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Define the MSNs for the IP system telephones within the PABX system.
•
Switch on the power (plug-in power supply unit) to the IP system telephone and wait until
•
the telephone has been initialized.
Once the IP system telephone has been initialized you will be requested to select the language in
the display.
Select the display language.
•
Press the arrow buttons to view the avai-
lable languages and confirm your selecti-
on by pressing
Enter one of the MSNs that has been input to the PABX system (in the example shown
•
here, 12) .
Confirm your entry by pressing
If no PIN has been entered in the system
configuration, press button
O
button
to do so.
Swtich to »
use DHCP
Select »
on
The telephone and PABX system are synchronized.
•
If there is no connection to the PABX system (no LAN link, or the telephone has not been log-
ged in), the symbol l »
You can now use the IP system telephone at the ISDN or UP0 port.
Connecting a headsets (not included in the scope of supply)
Recommended: Headsets from Plantronics including a U10PS connection cable or GN Netcom.
Connect the headset as shown in figure 5. Then lay the headset cord
O
.
O
again after being requested
«.
« .
©-----/ /----‰
deutsch english polski
O
.
Program dial number
MSN-1>12
Please enter login PIN
and
MSN-1>
off
« will be shown in the display instead of the time.
Welche Sprache
use DHCP
on
3
4
in the cord groove
and
7
Publicité
Table des Matières
