Optional Accessories; Tooling Required; Labour - Atlantic HM Notice D'utilisation Et D'installation

EN
Installation Manual: Installation
Tripod
(Not compatible with 50L immersion slim
water heater)
For vertical wall-mounted models. Mandatory
for walls not able to hold the weight for water
heaters greater than 100 L.
Mounting system
(Ø 10 mm min.)
(Depending on support)
1.2.2.

Optional accessories

Ceiling attachment console
(Not compatible with 50L immersion
slim water heater) Ideal for mounting
vertical wall-mounted water heaters
to the ceiling, when the wall is not
load bearing.
Frees up space under
the water heater.
Quick mounting plates
(Not compatible with 50L immersion
slim water heater) Ideal for cramped
places like a cupboard, where there
is no access for tightening to the
wall.
Reduced fitting time.
Capacity
50 to 100 litres
150 to 200 litres
1.3.

Tooling required

1.4.

Labour

2 people required
for assembly
È È
Number of plates
1
2
Surround kit for horizontal wall-
mounted versions - Underside
connection
Mandatory for mounting
on the ceiling.
Can be used to replace the mountings of an
older appliance. Enables the appliance to be
slid a few centimetres during installation
Universal mounting brackets
(Not compatible with 50L immersion
slim water heater)
Ideal for re-using
your old water heater's mountings
with
no additional holes
Reduced fitting time
Riser
Ideal for avoiding draining
modifications on vertical water
heaters
on a base
1
2
2 hours
39