Atlantic HM Notice D'utilisation Et D'installation page 37

General Warnings
connected to the sewer is required.
ELECTRICAL CONNECTION
Before the protective cover is removed, make sure that the power
supply is switched off in order to prevent any risk of injury or elec-
trocution. The electrical installation must include a single-pole cut-off
unit upstream of the water heater (fuse holder, circuit breaker with a
contact opening distance of at least 3 mm, and 30 mA differential cir-
cuit breaker).
Earthing is mandatory. A special terminal bearing the marking
designed for this purpose.
MAINTENANCE
•
The safety unit's draining device must be switched on periodically
(at least once a month). This operation enables any limescale de-
posits to be removed and to check that it is not blocked.
• To drain the appliance, turn it off, shut off the cold water supply,
then drain it using the safety unit handle having already turned on
a cold water valve.
• If the power cable is damaged, it must be replaced by the
manufacturer, the after-sales service or similarly qualified persons
in order to avoid any danger.
The instruction book of this product is available by contacting the after-
sales service.
is