Basic Operation - Sonoro MAESTRO SO-1000 Mode D'emploi

4.

BASIC OPERATION

To turn on
To turn off
(standby mode)
To directly select a
playback mode
To playback a CD
To control the volume
Pairing with a
Bluetooth headphone
for the first time
© sonoro audio GmbH 2019
Press .
MAESTRO starts operation from the last selected playback
mode.
Press .
The time and date (if set) are displayed.
MAESTRO will automatically turn off without playback and
operation after 15 minutes.
Press the direct operation mode key on the remote control
or the front panel to directly switching from one operation
mode to the other.
Insert CD disc in CD slot and MAESTRO starts playing the CD.
Press + or — on the remote control or rotate the volume
knob on MAESTRO.
In all operation modes except the Bluetooth mode, press
and hold key on MAESTRO or remote control. Or, press
SETUP once, then + or — (or rotate the navigation knob)
to select [Bluetooth headphone], then select [Bluetooth
pairing], then [Available devices], and then press OK to
confirm. Wait for a while, your Bluetooth device name is
shown in the display, and then select press OK to select it.
The small Bluetooth headphone icon
indicating that MAESTRO is in pairing mode. The Bluetooth
headphone icon
completed. The paired Bluetooth headphone device name
is temporarily shown in the display.
Note: Make sure that your Bluetooth headphone is already
in discovery mode and ready for pairing. For more details,
please refer to your Bluetooth device instruction manual.
stops blinking when the pairing is
is blinking and
97
GB