Performing Initial Setup - Sonoro MAESTRO SO-1000 Mode D'emploi

1. After complete all the connections, insert the power plug into the power outlet with
correct phase.
2. Switch on the mains power switch on MAESTRO.
3.8

PERFORMING INITIAL SETUP

When MAESTRO is powered on for the first time, selected the "Language" (to be used
in the display) and press OK to confirm the privacy policy statement.
Then, the "Setup wizard" appears on the display. Follow the instructions below to
configure some basic settings.
1. When the "Setup Wizard" is displayed, press + or − on the remote control (or rotate
the navigation knob) to select "YES" and then press OK to start the setup.
2. You are then prompted to select:
• Time format (12 or 24-hour),
• Source of auto update (Update from Radio, Internet or no update).
© sonoro audio GmbH 2019
GB
95