Using The Antennas - Sonoro MAESTRO SO-1000 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 140

3.3 USING THE ANTENNAS

1.
The scope of supply contains a cable antenna and a rod antenna.
For optimum radio reception, one of the two antennas must be used.
2.
Screw the desired antenna located on the back of MAESTRO to the FM/DAB
antenna connector.
3.
If you are using the cable antenna, unfold the cable antenna and align the antenna
so that you have the best possible reception.
For good FM/DAB radio reception, the two ends of the cable
antenna should form a ‚T' (dipole) with the connection cable.
For even better reception, connect MAESTRO to a suitable house
antenna.
4.
If you are using the rod antenna, pull the rod of antenna apart and align the antenna
so that you have the best possible reception.
5.
Screw the desired Wi-Fi antenna located on the back of MAESTRO to the WiFi
antenna connector. Lift Wi-Fi antenna upwards.
6.
If you want to connect MAESTRO to your network using an Ethernet cable, connect
an Ethernet cable from LAN port on the back of MAESTRO to your router.
© sonoro audio GmbH 2019
A: Recommended alignment for FM
B: Recommended alignment for DAB
GB
89

Publicité

Table des Matières
loading

Table des Matières