Network; Time/Date; Inactive Standby - Sonoro MAESTRO SO-1000 Mode D'emploi

20.3 NETWORK

• [Network wizard]
To establish network connection.
• [WPS WLAN Setup]
Select this option if your wireless router supports both WPS and PBC setup methods.
• [View Settings]
To view the current network information.
• [WLAN Region]
To select a WLAN region.
• [Manual Settings]
Under the [Wireless] option, select [DHCP enable] to allocate IP address automatically
or [DHCP disable] to do it manually.
• [NetRemote PIN setup]
To set up a NetRemote PIN.
• [Network Profile]
To display a list of networks saved by MAESTRO.
• [Clear Network Setting]
To clear all network settings.
• [Keep Network Connected]
To keep the WiFi network connected or not. If [YES] is selected, this allows you to wake
MAESTRO from standby using a remote app. If [NO] is selected, this will switch OFF the
WiFi network connection in standby mode.

20.4 TIME/DATE

• [Set Time/Date]
To set time and date.
• [Auto Update]
To select a source (Radio, Internet network or no update) for automatic time update.
If you are updating time from a source (Radio – FM/DAB), the daylight saving setting has
no effect.
If you are updating time from the Internet network, set your time zone.
• Set Format]
To set 12 or 24-hour time format.
• [Set Timezone]
To set a time zone.
• [Daylight Savings]
To enable or disable daylight saving time.

20.5 INACTIVE STANDBY

• This option sets the duration of time before MAESTRO turns off automatically.
Options include: Off, 2, 4, 5 and 6 hours.
© sonoro audio GmbH 2019
GB
125