Waring Commercial WFP14SC Manuel D'utilisation page 10

Two Pushers for Feed Tube
Pick up the large food pusher and the small food pusher. The large pusher is for processing larger veg-
etables. The smaller pusher nests in the larger pusher and can be used for smaller vegetables, guiding
long thin vegetables for more precise cuts and for jobs like slicing pepperoni.
DISASSEMBLy OF CONTINUOUS FEED CHUTE PARTS
ALWAYS UNPLUG THE CORD BEFORE DISASSEMBLING.
• Turn the cover clockwise until the safety interlock tab on the cover is disengaged from the safety
interlock switch on the chute, and the tabs are clear of the tabs on the cover.
• When the chute is in the 4 o'clock position, you can lift the cover off the chute. Remember to rotate
the cover lock to the open position before removing the cover.
• Remove the large food pusher from the feed tube. Remove the small pusher from the large pusher.
• To remove an accessory disc from the continuous feed chute, place two fingers under each side of
the disc and lift it straight up. Be careful not to touch the blades, as they are extremely sharp. Follow
directions on page 9 to remove stem from disc.
• Remove the continuous feed chute from the motor base. If the chute is pointing in the 4-o'clock
position, just lift it up. If not, rotate clockwise (left) to disengage the tabs on the bottom of the chute
platform (motor base) from the slots on the bottom of the continuous feed chute.
10