emerio WC-126433 Mode D'emploi page 9


Only install at a location with an ambient temperature suitable for the climate class of the appliance. The
climate class can be found under "TECHNICAL SPECIFICATIONS".

Place the appliance on a steady and safe surface. If the appliance is not horizontally leveled, adjust the
feet accordingly.

Avoid the installation:
- near heaters, next to a stove, direct sunlight or any other heat sources;
- at locations with high humidity (e.g., outdoors, bathroom), as metal parts would be susceptible to
corrosion under such circumstances;
- near volatile or flammable materials (e.g., gas, fuel, alcohol, paint, etc.), in rooms which may have
poor air circulation (e.g., garages).
- Do not expose the appliance to any weather.
- Some microwaves do not have a wave jamming shield so when your appliance is placed less than 1m
from a microwave, the operation of your appliance can be affected.

The appliance must be positioned so that the power socket remains accessible after installation.

Unwind the power cord but do not plug it into the electricity supply immediately.

Install your appliance in its final location before loading it. If the appliance is moved while loaded, the
appliance's walls may be permanently deformed.

IMPORTANT: Two people are required to properly and safely install the appliance.
Foot adjustment
Your appliance is equipped with an adjustable foot to facilitate levelling.
It is recommended to adjust the front feet to level the appliance. Correctly levelled feet will limit noise and
vibration of the appliance.
Turn the adjustable foot by hand (be careful not to jam your fingers).
- Turn the foot anti-clockwise to raise the level of the appliance.
- Turn the foot clockwise to lower the level of the appliance.
Before loading your appliance

Levelling: The appliance must be levelled before loading your wine.

Stable floor: Place the appliance on a stable surface where the ground can support the loaded weight.
Ambient temperature
The appliance should be placed in a room with temperature between 16-38˚C. If the ambient temperature is
above or below the climatic class, the performance of the appliance will be impacted. Cold or warm
temperature can cause fluctuating fridge temperatures, the appliance may not reach the set temperature or
may stop working.
- 8 -