emerio WC-126433 Mode D'emploi page 8

WC-126433
TRANSPORT AND PACKAGING
Transport the appliance
Transport the appliance, if possible, in vertical position. Otherwise, it is absolutely necessary to allow the
appliance standing upright for 24 hours before installation. Protect the appliance during transport against
weather influences.
Unpacking the appliance

Remove the appliance from its packaging.

To prevent hazards, check the appliance for any transport damage.
NOTE: Production residue or dust may have collected on the appliance. We recommend cleaning the appliance
according to chapter "Cleaning and Maintenance".
APPLIANCE EQUIPMENT
Appliance overview
1. Fan
2. Control panel & digital display
3. Glass door
4. Metal shelf with wooden trim
5. Temperature sensor
6. Adjustable foot
INSTALLATION
Conditions for the installation location

Good ventilation is required around the appliance to dissipate the heat properly and to guarantee efficient
cooling operation at low power consumption. Enough clearance is necessary.
To ensure adequate ventilation of the appliance, allow a minimum of 15 cm between the appliance and
the nearby walls as shown in the illustration below.
- 7 -
EN