Technical Data; Electrical Safety - METAWOOD MTSOR2003-254LA Traduction Des Instructions D'origine

WARNING. Do not stare directly at the laser beam.
A hazard may exist if you deliberately stare into the
beam, please observe all safety rules as follows;
• The laser shall be used and maintained in
accordance with the manufacturer's instructions.
• Never aim the beam at any person or an object
other than the workpiece.
• The laser beam shall not be deliberately aimed at
personnel and shall be prevented from being
directed towards the eye of a person.
• Always ensure the laser beam is aimed at a sturdy
workpiece without reflective surfaces. I.e. wood or
rough coated surfaces are acceptable. Bright shiny
reflective sheet steel or the like is not suitable for
laser use as the reflective surface could direct the
beam back at the operator.
• Do not change the laser light assembly with a
different type. Repairs must be carried out by the
laser manufacturer or an authorized agent.
CAUTION. Use of controls or adjustments or
performance of procedures other than those
specified herein may result in hazardous radiation
exposure. Please refer to the relevant European
standards, EN60825-1 for more information on
Lasers.

ELECTRICAL SAFETY

Always check that the power
supply corresponds to the
voltage on the rating plate.
DESCRIPTION
Your cut-off machine has been designed for sawing
wood and wood products.
1. base
2. center cover
3. handle with switch
4. safe cover
5. guide plate/fence
6. turnable table
7. laser
8. LED

TECHNICAL DATA

Mains voltage V
Mains frequency Hz
Power input W
-1
No load speed min
Max. speed rating saw blade min
Saw blade diameter mm
Blade bore mm
Cutting Capacities
90° Straight
45° Miter
45° Straight Bevel
45° Compound (L/R)
Weight Kg
Noise emission values measured according to
relevant standard.
Acoustic pressure level L
99.21 dB(A) K = 3 dB(A)
Acoustic power level L
WA
112.21 dB(A) K = 3 dB(A)
The sound power pressure may
exceed 85 dB(A), in this case
individual hearing protection
Weighted root mean square acceleration according
to relevant standard. :
< 2.5 m/s² K = 1.5 m/s²
230-240
50
2000W
S6 20% 5min 2400W
4500
-1
7000
250
30
85X340mm
85X240mm
52X340mm
52X240mm
11.1
PA
ATTENTION !
must be worn.
35