METAWOOD MTSOR2003-254LA Traduction Des Instructions D'origine page 34

Symbols
Read manual before use.
Always wear a dust mask.
To avoid injuries caused by
projected keep the machine
head downwards after cutting
until the blade is completely
Keep hands away from the
machine is running. Danger
contact with the saw blade.
For your safety, remove the
chips and other small pieces on
the table before starting work.
In accordance with essential
applicable safety standards
Warning / Danger!
Wear ear protection.
Wear eye protection.
stopped.
cutting area while the
of injury when coming in
of European directives
Double insulated
Wear protective gloves when
cracked, bent or damaged.
SAFETY RULES FOR LASER
LIGHTS
The laser light/laser radiation used in the DE FENG
laser system is Class 2 with maximum 1mW and
650nm wavelengths. These lasers do not normally
present an optical hazard, although staring at the
beam may cause flash blindness.
NEVER use water
for cutting.
handling the blade
replacement.
Do not use this blade for
cutting metal
This blade cuts wood
Do not use this blade for
cutting brick.
Do not use dull blades,
34