HAIDER BIOSWING 230 iQ V works Mode D'emploi page 13

Multifunctional Armrest (4F)
6
The arm rests may be adjusted in height, in order to relief the shoulder and
neck musculature. Please adjust the height that way, so that you don't feel
any tightness in the shoulder. Additionally you may align the supports of the
arm rests in width and profundity in accordance with the particular propor-
tions of the upper part of the body, and rotate them in respect to the posi-
tion of the forearm.
To adjust the height of the armrest
Please, pull upwards the key
the desired height and subsequently loosen the key.
To adjust the width and profundity, or rotate the support of the armrest
You may push by a noticeable locking resistance the supports of the armrest
to the left/right or ahead/rear. By a previous pushing of the operation
6b
key below the support, may be adjusted the rotation of the support.
6c
(The armrests may be adjusted in width by a long hole guiding in the bearing. Loosen the screwson
the lower part of the seat upholstery, establish the width by pulling or pushing the armrest outwards
or inwardly and subsequently tighten the screws again.)
6b
6c
6a
, and simultaneously adjust the supports at
6a
english | 24
Adjustment of Backrest Height
The backrest height can be individually adjusted to the shape of your spi-
nal column.
Adjustment of backrest height
Turn the operating element
7
backrest. Then adjust the backrest to the desired height by pushing it down-
ward or upward. When complete, turn the operating element to the left and
tighten it firmly.
7
to the right to loosen the support of the
english | 25
7