Yamaha CRX-B370 Mode D'emploi page 20

Listening to music
BLUETOOTH
20
En
Playing music via Bluetooth® connection
Bluetooth device
This unit
1
Enable the Bluetooth function on your
Bluetooth device.
2
Press BLUETOOTH on the remote control.
3
Select this unit from the Bluetooth device
list on your Bluetooth device.
The $ indicator glows when a connection is established.
4
Play music using your Bluetooth device.
Note
• Decrease the volume of the unit before playback. Otherwise,
playback volume may be too loud.
• If a Bluetooth device has been connected before, the unit will
connect to the last connected device when BLUETOOTH on the
remote control is pressed.
• If the unit is connected to another device via Bluetooth connection,
press and hold BLUETOOTH at least three seconds to terminate that
connection before connecting to the target device.
• If a passkey is required during the Bluetooth connection, enter the
number "0000."
• See documentation provided with your Bluetooth device for more
information on Bluetooth connection.
Unable to connect the unit to a Bluetooth device
If a Bluetooth connection was not established after following the
instructions shown at left, try the following.
1
If the Bluetooth device has been connected to the unit before,
delete the unit from the list of devices registered with your
Bluetooth device.
2
Press and hold BLUETOOTH on the remote control for at least
three seconds.
$ - "Pairing" will be shown in the front panel display.
3
Select this unit from the Bluetooth device list on your Bluetooth
device.
- The $ will glow in the front panel display when a connection is
established.