Recharging The Internal Battery Of The Mini Jumpstarter; Storage Instructions - Absaar AB-MJS270 Manuel De L'utilisateur

- Connect the cigarette lighter connector in the vehicle.
- Start up the engine.
- Press the test button (5) twice; the logo will be displayed on the LCD screen
the charging voltage and its status: Low (low voltage), Charge(Charging in progress) or Over
(Excessive charge).

9. Recharging the internal battery of the Mini Jumpstarter:

Important: Recharge the internal battery of the Mini Jumpstarter immediately after
purchase, before using for the first time, after each use and every 3-6
months. This will maintain the internal battery in good condition for storage
and will prolong its life.
In order to recharge the internal battery of the Mini Jumpstarter:
- Use the USB cable provided with the Mini Jumpstarter.
- Connect the micro-USB end of the cable to the charge/test micro-USBport (8).
- Then connect the USB cable to a 5V 2A USB power supply. Usinga 5V 1A power supply also
works although it will take much moretime.

10. Storage instructions:

- Fully recharge the internal battery of the Mini Jumpstarter.
- Store the Mini Jumpstarter in a dry environment at an ambient temperaturebetween 0°C and
+40°C.
- Do not allow the battery to become fully discharged.
- Recharge it with each use.
- If you do not use the Mini Jumpstarter, recharge it every 3-6months in order to prevent it from
fully discharging.
- Do not open the unit in order to replace internal parts, including thebattery.
11
EN
as well as