Safety Instructions - Absaar AB-MJS270 Manuel De L'utilisateur

EN
Important : Fully recharge the internal battery before using for the first time!
Always keep the internal battery fully charged before use!
Do not use if the battery is not fully recharged.

3.Safety instructions:

RISK OF ELECTRIC SHOCKS!
- Do not expose the Mini Jumpstarter to rain, water, vapour or condensation.
- Do not insert any foreign bodies or objects in the connector of the clamps or in the USB ports.
- Always keep children at a distance.
- Do not open the Mini Jumpstarter to change the internal batteries. The batteriescannot be
replaced.
RISK OF EXPLOSION!
- Do not expose the device to direct sunlight!
- When using the Mini Jumpstarter, do not smoke and keep any incandescentobjects at a
distance!
- Do not use the Mini Jumpstarter in confined smoke-filled spaces such as in the hold of a
motorboat.
- Do not use the Mini Jumpstarter near to propane tanks.
FIRE HAZARD!
- Do not crush.
- Do not perforate.
- Do not make the clamps touch each other or create an electrical connection between them
with a piece of metalor a conductor. This can damage the Mini Jumpstarter or create a hazard.
- Always disconnect the connector of the clamps immediately after use
- Do not store the Mini Jumpstarter with the clamps connected to the device.
- The Mini Jumpstarter is only designed to be used for a very short period of time.Each start-up
attempt should not exceed 3 seconds. Usingthe Mini Jumpstarter for more than 3 seconds can
damage it. Wait for 1 minute betweeneach start-up attempt.
Caution: Working temperature. Do not expose to working temperatures in excess of +60°C
(+140°F) or less than -20°C (-4°F). Using the Mini Jumpstarter above or below
these temperatures can reduce the capacity of the Mini Jumpstarter's internal
battery or shorten the service life of the battery.
4