Lamborghini Caloreclima EM 16 Notice D'installation Et D'entretien page 45

EM 26-E
To gain access to the main components,
remove the cover (fig.4). Combustion
head maintenance should be made as
follows:
- Unscrew the screws 1 and remove the
cover 2 (fig.4).
- Unscrew the screws 3 and the central
pin 4 (fig.4).
- Hang the component holder plate into
the service position 5 (fig.5-5A).
- To gain access to the draught tube
and to the electrodes, remove the
hinge screw 6 and the screws 7 (fig.6).
fig. 5
fig. 6
fig. 5A
45
fig. 4
UK