Hayward EZ-CHEM Guide De L'utilisateur page 23

To configure the device, simultaneously press
Program
Configuration
Setting the language:
Program
press
Configuration
Select the language using
Setting the flow switch
Program
press
Configuration
The parameter must be set to On.
This parameter must never be set to OFF.
•
WARNING – injecting a treatment product when the filter pump is stopped can cause irreversible material damage and/
or serious injuries.
Page 9 of 13
CONFIGURATION
then twice, then enter using
or and confirm with
, then and enter using
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
and for 5 seconds to display the following screen.
.
.
.
EZ-CHEM
Used to select a menu or confirm
a selection
Used to cancel or exit a menu
Used to increase a value or
navigate up a menu
Used to reduce a value or
navigate down a menu
Rev. C