Electrical Connection - Franke FCBU 1204 C Mode D'emploi Et Installation

• Connect the hood to the mains through a two-pole switch having a contact gap of at least 3
mm..
• Before carrying out any operation the Hood
must be disconnected by removing the plug
from the power socket or turning off the
main switch.
• From the inside of the hood canopy connect
up the power supply cable.
• Open the terminal box by unfastening the
screws on cover (A), connect the power
supply to the wiring in the box and then
close the cover again.
• Fix the Charcoal Filter on the Metal grease
filters like as indicated in picture.
EN

ELECTRICAL CONNECTION

8 8