Technical Data - Genie C-160X Mode D'emploi

2. Overrunning the shredding capacity e.g. adding more than 6 sheets of paper
(80g) in one operation or in the event the paper is not inserted length-wise into
the feed slot.
Under the above-mentioned conditions, the automatic overload guard of the motor is
triggered, whereupon the current feed to the device is interrupted. In such a case,
please take the following steps:
1. Disconnect the main plug from the AC socket in order to avoid the risk of serious
injuries and wait at least 60 minutes until the overload guard has reset. Now tear
off excess paper from the top of the shredder or remove it.
2. Reconnect the main plug to the AC socket and press the REVERSE button. Pull
the remaining paper away from the shredding blades. If necessary, repeat this
step.
3. With pressing the FORWARD button and the open feed slot, you may now
continue the normal shredding process.

Technical data:

Shredding type:
Size of cut:
Shredding capacity:
Feed width:
Input voltage:
Dimensions:
Waste basket:
Noise level:
Cleaning:
Danger! Unplug the power cord before cleaning. There is a risk of electric
shock!
Warning! The blades of the device are very sharp! Danger of injury!
1. Empty the drip trays regularly.
2. Clean the drip trays and paper cutter with a slightly dampened cloth and possibly
with a mild detergent.
3. Remove any residue in the cutting holes with a suitable object. Make sure that
while cleaning the plug is pulled in order to avoid injuries.
HANDLING THE GUARANTEE
Thank you very much for purchasing this GENIE product. Please note the following
advice whenever this machine does not function faultlessly, contrary to expectations.
The guarantee period amounts to 24 months from the date of purchase, provided that
the machine has been used appropriately. Please keep the proof-of-purchase
voucher and original packaging in a safe place. The warranty is only valid for defects
in materials or fabrication. However, it is invalid for damage that has occurred to
Cross-cut
4 x40 mm (paper)
6 pages DIN A4 (80g)
approx. 220 mm
220~240 VAC, 50 Hz, 1,0 A
approx. 300 x 142 x 363 mm
ca. 11 l capacity
approx. 72 dB
10