Table des Matières
Publicité
ANNEXE 1 : BACNET PROTOCOL - IMPLEMENTATION ET CONFORMITE
Extrait du manuel de configuration de la passerelle (#808-356)
Date : January 2005
Vendor Name : CARRIER
Product Name : BacNet Translator
Product Model Number : 33CNTRAN485
Applications Software Version : 1.0 Firmware Revision: 1.0
BacNet Protocol Revision: 2
Product Description : The BacNet Translator converts data
from a single Carrier equipment control (Chiller, RTU or
other) into BacNet objects. The object properties are read
via a BacNet MSTP data link layer.
BacNet Standardized Device Profile (Annex L):
□
BacNet Operator Workstation (B-OWS)
□
BacNet Building Controller (B-BC)
□
BacNet Advanced Application Controller (B-AAC)
■
BacNet Application Specific Controller (B-ASC)
[Note that the Translator is a gateway device]
□
BacNet Smart Sensor (B-SS)
□
BacNet Smart Actuator (B-SA)
List all BacNet Interoperability Building Blocks
Supported (Annex K):
■
K.1.2 BIBB - Data Sharing - ReadProperty-B (DS-
RP-B)
■
K.1.4 BIBB - Data Sharing - ReadPropertyMultiple-B
(DS-RPM-B)
■
K.1.8 BIBB - Data Sharing - WriteProperty-B (DS-
WP-B)
■
K.1.10 BIBB - Data Sharing -
WritePropertyMultiple-B (DS-WPM-B)
■
K.2.2 BIBB – Alarm and Event – Notification
Internal-B (AE-N-I-B)
■
K.5.6 BIBB – Device Management -
DeviceCommunicationControl-B (DM-DCC-B)
■
K.5.1 BIBB - Device Management - Dynamic Device
Binding-A (DM-DDB-A)
■
K.5.2 BIBB - Device Management - Dynamic Device
Binding-B (DM-DDB-B)
■
K.5.3 BIBB - Device Management - Dynamic Object
Binding-B (DM-DOB-A)
■
K.5.12 BIBB - Device Management -
TimeSynchronization-B (DM-TS-B)
■
K.5.16 BIBB – Device Management -
ReinitializeDevice-B (DM-RD-B)
Segmentation Capability: None
□
Segmented requests supported Window Size
□
Segmented responses supported Window Size
42
Standard Object Types Supported:
•
Device Object, Analog Value, Binary Value, Schedule
and Notification Class Objects
•
An object type is supported if it may be present in the
device. For each standard Object Type supported
provide the following data:
1)
Whether objects of this type are dynamically creatable
using the CreateObject service NO
2)
Whether objects of this type are dynamically deletable
using the DeleteObject service NO
3)
List of the optional properties supported - see attached
4)
List of all properties that are writable where not
otherwise required by this standard - see attached
5)
List of proprietary properties and for each its property
identifier, datatype, and meaning NONE
6)
List of any property range restrictions see attached
Data Link Layer Options:
□
BacNet IP, (Annex J)
□
BacNet IP, (Annex J), Foreign Device
□
ISO 8802-3, Ethernet (Clause 7)
□
ANSI/ATA 878.1, 2.5 Mb. ARCNET (Clause 8)
□
ANSI/ATA 878.1, RS-485 ARCNET (Clause 8), baud
rate(s) ____________
■
MS/TP master (Clause 9), baud rate(s): 1200, 2400,
4800, 9600, 19.2K, 38.4K
□
MS/TP slave (Clause 9), baud rate(s):
□
Point-To-Point, EIA 232 (Clause 10), baud rate(s):
□
Point-To-Point, modem, (Clause 10), baud rate(s):
□
LonTalk, (Clause 11), medium: __________
□
Other:
Device Address Binding:
Is static device binding supported? (This is currently
necessary for two-way communication with MS/TP slaves
and certain other devices.)
Networking Options:
□
Router, Clause 6 - List all routing configurations, e.g.,
ARCNET-Ethernet, Ethernet-MS/TP, etc.
□
Annex H, BacNet Tunneling Router over IP
□
BacNet/IP Broadcast Management Device (BBMD)
Does the BBMD support registrations by Foreign Devices
? □ Yes
■ No
Character Sets Supported:
Indicating support for multiple character sets does not
imply that they can all be supported simultaneously.
■ ANSI X3.4 □ IBM/Microsoft DBCS □ ISO 8859-1
□ ISO 10646 (UCS-2) □ ISO 10646 (UCS-4) □ JIS C 6226
BacNet MS/TP to BacNet/IP Solutions
Merci de contacter Carrier.
□ Yes ■ No
Publicité
Table des Matières
