Festool MFT/ KAPEX Notice D'utilisation D'origine page 7

The corner feet [1-2] are fitted with rubber caps
so that the bench stands securely when the
foldaway legs are folded in.
7 Assembly
7.1 Mounting of K A P E X
The perforated top on the MFT / K A P E X was spe-
cially designed for mounting the KS 120/KS 88.
As described in image [2], position the electric
power tool on the MFT / K A P E X .
Secure electric power tool at MFT using clamps.
7.2 Mounting of C O N T U R O
The perforated top on the MFT / 3 C O N T U R O
was specially designed for mounting the KA 65.
Image [3A]: Mount the cross brace MFT 3-QT
[1-4], as described in the assembly instructions
for the cross brace, at the MFT/3 C O N T U -
R O .
Image[3B]: Insert adapter plate AP-KA 65 [1-5],
as described in the assembly instructions for
the adapter plate, in the recess at the MFT/3
C O N T U R O .
Image [3C]: Install edge bander KA 65, as de-
scribed in the assembly instructions for the
adapter plate, in the adapter plate AP-KA 65.
Glueing the edge band. Observe the operating
instructions for the edge bander KA 65.
All operating instructions for Festool devices
can be found online at www.festool.com
8 Service and maintenance
Customer service and repair only
through manufacturer or service
workshops: Please find the nearest
address at: www.festool.com/service
Only use original Festool spare parts!
EKAT
4
Order No. at: www.festool.com/service
5
3
2
1
9 Environment
Do not dispose of the device as domestic waste!
Dispose of machines, accessories and packaging at
an environmentally responsible recycling centre.
Observe the respective national regulations.
Information on REACh: www.festool.com/reach
MFT
GB
7