Inserting The Battery - HumanTechnik cm-BT Mode D'emploi

BA_CM_BT_0407

Inserting the battery

One "AAA"-type battery is required to operate this device.
A rechargeable battery of the same type can also be used.
A recharger with a rechargeable battery is available as a special accessory
(Part No. A-4951-0).
1
2
3
4
03.04.2007 8:49 Uhr
1 Switch your CM-BT receiver off.
Remove the device's battery cover.
2 Insert the enclosed battery into the battery
compartment – make sure the battery
polarity is correct!
"+" and "-" markings on the bottom of the
battery compartment indicate the direction in
which to place the battery.
3 Make sure that the battery is inserted
completely.
4 Replace the battery cover.
Seite 21
English 21