Error Message And Error Correction; Contents Supplied; Disclaimer; Warranty And Service - ANSMANN Racing xMove Deluxe Manuel D'utilisation

ERROR MESSAGE AND ERROR CORRECTION

Error message
INPUT BATTERY
VOLTAGE ERROR
NO BATTERY
OUTPUT BATTERY
REVERSE POLARITY
OUTPUT CIRCUIT
PROBLEM
CHECK THE BATT.
OPEN CIRCUIT
CHECK THE BATT.
OVER VOLTAGE
CHECK THE BATT.
LOW VOLTAGE

CONTENTS SUPPLIED

xMove Deluxe
1 x Charger
1x Operating Instructions

DISCLAIMER

Information in these operating instructions can be changed without prior notice. ANSMANN ENERGY cannot accept liability for direct, indirect,
accidental or other claims or consequential damages originated by using this charger and information given in these operating instructions.
ANSMANN ENERGY GMBH
Industriestrasse 10
D-97959 Assamstadt / Germany
e-Mail: hotline@ansmann-energy.com • www.ansmann-energy.com
Technical details subject to change without prior notice. No liability accepted for typographical errors or omissions. 01/2007
1_manual_xmove_06-12.indd 13 1_manual_xmove_06-12.indd 13
Possible reason
Input voltage
under 11,0 V or over 15,0 V
No battery or broken battery connected when
pushing the start button
Polarity of battery wrong
Charger overloaded
Battery connection opened during charging
Battery voltage set to high
Battery voltage set to low,
battery broken
Prozessfarbe Schwarz Prozessfarbe Schwarz
Possible Solution
Check input power supply
adjust or change
Check battery or battery connection
Check battery connection
red = + plus black = - minus
Check battery connection, start again
Check battery connections
Check voltage/ cell setup
Check voltage/ cell setup
Check battery pack
11.01.2007 16:45:44 Uhr 11.01.2007 16:45:44 Uhr
12