Enabling/Disabling The Auto Power Standby Function; Initializing The Unit - Yamaha ATS-2070 Mode D'emploi

Enabling/disabling the auto power
standby function
Enabling the auto power standby function prevents the unit from
remaining on when not in use. When the auto power standby function
is enabled, the unit automatically turns off in any of the following
situations.
• No operations for 8 hours
• No audio input and no operations for 20 minutes when
BLUETOOTH or HDMI is selected as the input source.
1
Turn off the unit.
2
Touch and hold and touch
The auto power standby function is enabled or disabled, and the
unit turns on. The indicator shows auto power standby function
status for several seconds immediately after the unit is turned
on.
Glows (disabled)
Off (enabled)
NOTE
• The default setting for the auto power function varies by country or region.
− U.K., Europe, Central and South America, and Asia models: enabled
− Other models: disabled
on the center unit.

Initializing the unit

Follow the procedure below to initialize the unit.
1
Turn off the unit.
2
Touch and hold and
indicators flash.
Flash (initialized)
on the center unit until all
33
En