Data Plate; How To Obtain Service Or Parts - Bosch 300 Série Guide D'utilisation Et D'entretien

Oven Problem
Oven control panel beeps & displays any
F code error (for example F10, F11, F13,
F14, F15, F30, F31 or F90).

Data Plate

The data plate shows the model and serial number. Refer
to the data plate on the appliance when requesting service.
The data plate location is shown in the following picture.
Open storage drawer (some models) or remove lower front
panel (some models).
Data Plate

How to Obtain Service or Parts

To reach a service representative, see the contact
information at the front of the manual. Please be prepared
with the information printed on your product data plate
when calling.
Possible Causes and Suggested Solutions
Oven control has detected a fault or error condition. Press CANCEL to
clear the display & stop beeping. Try the bake or broil feature again. If the F
code error repeats, remove power from appliance, wait 5 minutes and then
repower appliance and set clock for the time of day. Try the bake or broil
feature again. If the fault recurs, record fault and call for service.
English 27