Electronic Programming Clock; Use - ETNA A3405 Notice D'utilisation

Electronic programming clock

Setting the time on the clock
On connecting the oven, you will notice that
'12:00' appears in the display and that a light
begins to flash next to the symbol. By pressing
the '+' and '-' buttons, the correct time can be set
on the clock, which is subsequently stored and the
flashing light goes out.
Manual use
After setting the correct time, the oven is ready for
use. Select a temperature and a cooking function.
To switch off the oven, set the selectors to the
position '0'.
Warning function
1 Press the MODE button until the signal next to
the symbol begins to flash.
2 Choose the time when you want the alarm to
sound, pressing the "+" or "-" button.
3 Subsequently, the light will remain on,
indicating that the alarm is programmed.
4 At the end of the programmed time, an alarm
will sound and the light will begin to flash.
5 Press any button to turn off the alarm. The light
goes out and the screen shows the current time
again.
Programming the cooking time
1 Press the MODE button until the indicator next
to the symbol begins to flash.
2 Select the length of the cooking time by
pressing the '+' or '-' button.
3 Subsequently, the indicator that was flashing
will light, indicating that the oven will switch
itself off automatically.
4 The display will then show the current time.
5 Select a temperature and cooking function.
6 When the set time has elapsed, the oven
will switch off, an alarm will sound and the
indicator will begin to flash.
7 Press any button to switch off the alarm, the
oven switches on again.
8 Set the selectors in the position '0' to switch
off the oven.
Programming the end of cooking time
1 Press the MODE button until the indicator next
to the symbol begins to flash.
2 Select the time that the cooking has to end by
pressing the "+" or "-" button.
3 Subsequently, the indicator that was flashing
is lit, indicating that the oven will switch itself
off automatically.
4 The display will now show the current time.
5 Select a temperature and cooking function.
6 When the programmed time is reached, the
oven will switch off, an alarm will sound and
the indicator will begin to flash.
7 Press any button to switch off the alarm and
the oven will switch on again.
8 Set the selectors in the position '0' to switch
off the oven.
This function may be used even though you are
already cooking in your oven. To do so, follow the
instructions given except Nº 5.
Programming the duration and automatic stop
1 Press the MODE button until the indicator next
to the symbol begins to flash.
2 Select the length of the cooking time by
pressing the "+" or "-" button.
3 Subsequently, the indicator that was flashing
will remain lit.
4 Press the MODE button again until the
indicator above the symbol begins to flash.
5 Select the time that the cooking has to end by
pressing the "+" or "-" button.
6 Subsequently, the indicator that was flashing
will remain lit.
7 Select a function and cooking temperature.
8 The oven will remain switched off. The
indicators next to the and symbols lit.
Your oven is programmed.
9 When the programmed time is reached, the
oven will switch itself on and will continue
cooking during the programmed time.
10 When the programmed finishing time is
reached, the oven will switch off, an alarm will
sound and the light next to the symbol will
begin to flash.
11 Press any button to switch off the alarm and
the oven will switch on again.
12 Set the selectors to the position '0' to switch
off the oven.
Caution
Pressing the MODE button, the display on the
screen will show any function programmed. It can
be changed by pressing the '+' or '-' button. By
selecting the desired function, the indicator next
to the corresponding signal will light.
In the event of a power cut, all the programming
of the electronic clock will be erased. If you
connect the oven again, you will notice that
'12:00' appears in the display. The correct time
has to be set.
Switching off the time of day
To switch off the time of day, press two buttons
at the same time and, after several seconds the
screen of your clock will go out. To switch on the
time of day, press any button and the current time
will appear again.
This function can only be used when the clock
shows the current time and there is no function
programmed (no function symbol is lit). Press any
button to switch on the time of day again.