Manual Operation - Teka HLD 45.15 Guide D'utilisation

• To change the time, touch the + and – sym-
bols together until the indicated time flashes
on the display. Change the time by pressing
the + or – sensors. Two beeps will then con-
firm that the new time has been set.
NoTE
The clock light has a night mode so the dis-
play light will dim between 00:00 and 6:00
hours.

MaNUaL opERaTIoN

• After setting the clock, the oven is ready for
use. Select a cooking function and tempera-
ture.
• The
pending on the top and bottom cavity func-
tions.
• During cooking, the
indicate that heat is being transmitted to the
food.
• This symbol disappears when the selected
temperature has been reached.
• Set the controls to
ELECTRoNIC CLoCk/TIMER sETTINGs
Timer alarm: The alarm will go off at the pro-
grammed time, even if the oven is not in use.
Cooking Time (top and bottom cavity): This
function allows you to programme the cooking
time, after which the oven will turn off automat-
ically.
Cooking stop Time (top cavity only): This
setting allows you to programme the time for
cooking to stop, after which the oven will turn
off automatically.
Cooking Time and Cooking stop Time (top
cavity only): This setting allows you to pro-
gramme the cooking time and cooking stop
time. The oven switches on automatically at the
set time and operates for the selected cooking
symbols will light up de-
symbol will light up to
to turn off the oven.
time (Cooking Time). It then switches off auto-
matically at the indicated time (Cooking Stop
Time).
pRoGRaMMING THE TIMER aLaRM
1. Touch the sensor with your fingertip until
the symbol starts flashing on the display.
The clock will also flash 00:00.
2. Select the time after which you want the
alarm to sound by pressing the + or – sen-
sor.
3. You will hear 2 beeps to confirm that the
time has been set. The clock will start count-
ing down from the selected time and the
symbol will flash slowly.
4. When the time is up, the alarm will go off and
the symbol will flash quickly.
5. Touch any sensor to stop the alarm. The
symbol will then disappear.
If you want to change the timer alarm, simply
touch the sensor with your fingertip and then
press the + or – sensor. You will hear 2 beeps
to confirm that the time has been changed. The
clock will then start counting down from the
new time and the symbol will flash slowly.
NoTE
You cannot see the current time on the dis-
play when the timer alarm is set.
pRoGRaMMING CookING TIME FoR
THE Top CavITy
1. Touch the sensor with your fingertip until
the AUTO symbol starts to flash and 00:00
appears on the display.
2. Select the cooking time by pressing the +
or – sensor.
3. You will hear 2 beeps, the AUTO symbol will
flash slowly and the display will show the
time left before the oven switches off auto-
matically.
English
17
User's Guide