Child Safety Function - Teka HLD 45.15 Guide D'utilisation

6. Touch any sensor to stop the alarm and
to turn off the AUTO symbol. The oven will
switch on again.
7. Set the controls to
You can change the stop cooking time at any
time by touching the sensor with your finger-
tip until the AUTO symbol starts to flash quickly
and you see the stop time on the display. Now
press the + or – sensor to change the time.
pRoGRaMMING CookING TIME aND
CookING sTop TIME
1.
Touch the sensor with your fingertip
until the AUTO symbol starts to flash and
00:00
2. Select the cooking time by pressing the +
or – sensor.
3. You will hear 2 beeps, the display will show
the remaining cooking time, and the AUTO
symbol will flash slowly.
4. Touch the sensor until the AUTO symbol
starts to flash quickly. The display will show
the current time and the programmed
cooking time.
5. Select the cooking stop time by pressing
the + or – sensor.
6. This will be confirmed by two beeps. The
current time will show on the display and
the AUTO symbol will remain lit.
7. Select a cooking function and temperature.
8. The oven will remain off and the AUTO light
will be on. The oven is now programmed.
9. When it is time to start cooking, the oven
will turn on and will operate for the pro-
grammed cooking time.
10. While cooking, the display will show the
cooking time remaining and the AUTO
symbol will flash slowly.
to turn off the oven.
11. When the cooking time is up, the oven will
turn off, an alarm will sound, and the AUTO
symbol will flash quickly.
12. Touch any sensor to stop the alarm and
to turn off the AUTO symbol. The oven will
switch on again.
13. Set the controls to
If you want to change the remaining cooking
time while the oven is on, press the
until the AUTO symbol starts to flash quickly.
Now press the + or – sensor to change the
time.

CHILD saFETy FUNCTIoN

This function can be selected at any time while
using the oven.
To activate the function, press the + and – sen-
sors at the same time for several seconds. You
will hear a beep and see the word saFE on the
display. The clock/timer is locked.
If the oven is off and you activate the child
safety function, the oven will not work even if a
cooking function is selected.
If this function is activated while you are cook-
ing, it will only lock the electronic clock/timer
settings.
If any clock/timer sensor is touched while the
child safety function is on, the word saFE
will appear on the display. The clock/timer is
locked.
To disable the function, press the + and – sen-
sors at the same time for several seconds until
you hear a beep.
CaUTIoN
In the event of a power failure, your elec-
tronic clock/timer settings will be erased and
12:00 will flash on the clock display. Reset it
and programme again.
English
to turn off the oven.
sensor
19
User's Guide