Teka HLD 45.15 Guide D'utilisation page 18

4. Select a cooking function and temperature.
5. Once the cooking time is up, the oven will
turn off, an alarm will sound and the AUTO
symbol will flash quickly.
6. Touch any sensor to stop the alarm and
to turn off the AUTO symbol. The oven will
switch on again.
7. Set the controls to
You can change the remaining cooking time at
any time by touching the
fingertip until the AUTO symbol starts to flash
quickly. Now press the + or – sensor to change
the time.
pRoGRaMMING CookING TIME FoR
THE boTToM CavITy
The oven incorporates pre-programmed set-
tings for the bottom cavity cooking functions.
You can modify these times using the + or –
sensors to select the desired duration.
1. Pizza Function: select the Pizza setting in
the function control dial and the maximum
temperature on the bottom cavity tempera-
ture control dial. A pre-programmed time of
8 min will appear on the clock/timer display.
Use the + or – sensors to modify the cooking
time according to your liking or the instruc-
tions that came with the pizza.
NoTE
It is not necessary to preheat the oven to
cook pre-cooked or frozen pizzas in the bot-
tom cavity.
2. Toast Function: select the Toast setting on
the bottom cavity function control dial and
the maximum temperature on the bottom
cavity temperature control dial. A pre-pro-
grammed time of 3.5 min will appear on the
clock/timer display. Use the + or – symbols
to change the cooking time according to
your liking.
18
User's Guide
to turn off the oven.
sensor with your
3. Melted Cheese Topping Function: select the
Melted Cheese Topping setting on the top
cavity function control dial and the maximum
temperature on the bottom cavity tempera-
ture control dial. A pre-programmed time of
6 min will appear on the clock/timer display.
Use the + or – symbols to change the cook-
ing time according to your liking.
4. For all the above settings, once the cooking
time is up, the oven will turn off, an alarm
will sound and the AUTO symbol will flash
quickly.
5. Touch any sensor to stop the alarm and
to turn off the AUTO symbol. The oven will
switch on again.
6. Warming Function: select the Warming set-
ting on the top cavity function control dial
and a maximum temperature of 90º on the
bottom cavity temperature dial. A pre-pro-
grammed time of 8 min will appear on the
clock/timer display. After this preheating
time, an alarm will sound and the oven will
turn off. Touch any sensor to stop the signal.
The oven will turn on again. Place plates in
the cavity to keep them warm for as long as
you wish.
7. Set the controls to
You can change the cooking time at any time
by pressing on the + or – sensors.
pRoGRaMMING THE CookING sTop TIME
1. Touch the sensor with your fingertip until
the AUTO symbol starts to flash.
2. Select the cooking stop time by pressing the
+ or – sensor.
3. You will hear 2 beeps, the display will show
the current time and the AUTO symbol will
flash slowly to indicate that the oven will
switch off automatically.
4. Select a cooking function and temperature.
5. When the cooking time is up, the oven will
turn off, an alarm will sound and the AUTO
symbol will flash quickly.
to turn off the oven.